Unusual Tubes
audioXpress|December 2022
Most aficionados of hollow-state electronics—at least most of the people reading this column—are familiar with the tubes most commonly used in classic or contemporary audio amplifiers. In this article, we explore some of the less common tube types used for audio applications.
Richard Honeycutt
Unusual Tubes

To begin, most of our readers are probably familiar with preamp triodes e.g., the 12_ 7 family, which includes the 12AU7, the 12AX7, the 12AY7, and the 12AT7); preamp pentodes e.g., the 6AU6); power triodes e.g., the 2A2, the 811, and the 300B); and power pentodes and beam power tubes such as the 6AQ5, the 6BQ5, the EL34, and the EL84 Photo 1). I have discussed these and other common tubes in past audioXpress articles.

Some tube audio fans are also acquainted with some of the antique tubes used in pre-war” meaning 1930s and earlier) radios, including the type 01, 35, 56, and 76 triodes; type 80 and 88 rectifiers; and others Photo 2).

A few of our readers might remember the tubes made specifically for TV use, some of which can be re-purposed for audio amps including horizontal deflection output tubes such as the 6BQ6GTB and low-power audio output tubes such as the 6K6, the 6F6, the 6W6, and the 6Y6 Photo 3). And some of you might even recall the 7-pin loctal tubes used in auto radios and a few guitar amps in the 1940s, such as the 7F7 high-mu twin triode and the 7A5 beam power tube Photo 4).

However, there are a number of lesser known tubes that were made for early radio receivers, telephony, and military uses. Let’s investigate some of these.

Photo 2: The 01 triode, like many antique tubes, had a 4-pin base.

Western Electric

Most of our readers probably know that Lee de Forest invented the Audion vacuum triode in the early years of the 20th century. The inventor and most of his contemporaries considered the Audion to be simply a sensitive radio detector. In 1912, about five years after inventing the Audion, de Forest began investigating the basis of its sensitivity as a radio detector: specifically its ability to amplify electrical signals.

This story is from the December 2022 edition of audioXpress.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

This story is from the December 2022 edition of audioXpress.

Start your 7-day Magzter GOLD free trial to access thousands of curated premium stories, and 9,000+ magazines and newspapers.

MORE STORIES FROM AUDIOXPRESSView All
Perspectives on Automotive Sound Design - In the Era of Electric Vehicles
audioXpress

Perspectives on Automotive Sound Design - In the Era of Electric Vehicles

From combustion engine vehicles to fully electric vehicles, and from sound systems in the car to sound design and synthesis for the car itself, everything is changing in the automotive industry. This conversation with two members of the DSP Concepts automotive team with vast experience in the field, John Whitecar, VP of Product Management, and Steve Ernst, Head of Business Development, offers valuable insights on how things are evolving.

time-read
10+ mins  |
June 2023
Audioscenic: From Vision to Product
audioXpress

Audioscenic: From Vision to Product

Audioscenic is an innovative 3D audio beamforming technology company spun off from the University of Southampton. It is a remarkable example of perseverance, from early development to the first commercial implementation, which audioXpress considered Best of Show at CES 2023. This article shares the story so far, as Audioscenic continues its groundbreaking journey exploring consumer applications for its forward-thinking approach to spatial audio.

time-read
8 mins  |
June 2023
The Changing Audio-Ecosystem in Electric Vehicles
audioXpress

The Changing Audio-Ecosystem in Electric Vehicles

The rapid shift to plug-in hybrid and full-battery electric vehicles is having a significant and long-lasting impact on how audio systems are integrated into cars. While some noises are much more prominent due to the absence of the familiar engine noise, the transition offers exciting possibilities for sound systems, passenger entertainment, and enhancing the overall automotive experience.

time-read
10+ mins  |
June 2023
A (Z)OTL with 300Bs: Part 1-The Makeover
audioXpress

A (Z)OTL with 300Bs: Part 1-The Makeover

Rebuilding an amplifier for reasons of better reliability, better aesthetics, or bringing it up to the latest standard can be very rewarding. And if it is a classical, technological grandstand, even more so. Thomas Perazella embarked on such an adventure with a famous David Berning ZOTL amplifier. In Part 1 of this article, Tom presents the amplifier and discusses its unique circuitry. In Part 2, he will proceed to dismantle and rebuild the amp for the new owner and place it in a new chassis

time-read
10+ mins  |
May 2023
The Hypex NCORE NCx500 Amplifier Module
audioXpress

The Hypex NCORE NCx500 Amplifier Module

NCORE (NC) amplifier modules are the flagship product from Dutch manufacturer Hypex Electronics and its success among the high-end audio brands is well documented. In 2022, Hypex announced the introduction of its improved NCOREX technology, starting with the NCx500 OEM module, which audioXpress received for review

time-read
10+ mins  |
May 2023
Monoblock Power Amplifier with Precision Bias Control
audioXpress

Monoblock Power Amplifier with Precision Bias Control

In Part 2, Bruce Gillingham discusses the remainder of the MB1's circuitry, its mechanical design, and its performance measurements

time-read
10+ mins  |
May 2023
A Trip Down Memory Lane
audioXpress

A Trip Down Memory Lane

The history of tube application began with radio receivers, the telephone system, and cinema sound systems. Later, tubes began to be used in home stereo systems, and in amplifiers for electric guitars. Today, the primary markets for tubes are high-end stereo and musical instrument amplifiers. In this article Richard Honeycutt remembers his first contact with \"starter\" guitar amps as a teenager, progressing throughout his days as a semi-pro musician

time-read
5 mins  |
May 2023
The Vanderveen Trans PP80 Valve Amplifier
audioXpress

The Vanderveen Trans PP80 Valve Amplifier

This new push-pull (PP) valve amplifier, featuring the Trans technique, delivers 80W power, refined resolution, valve-sound envelopment, and low distortion plus good speaker damping. And... the amp is simple to construct

time-read
10+ mins  |
May 2023
Accuracy in LTspice Modeling
audioXpress

Accuracy in LTspice Modeling

Sometimes we need to consider the human factor when using circuit design simulation tools. In this article, our hollow-state expert details an error that occurred in a past article, which is now being corrected.

time-read
4 mins  |
March 2023
Transitioning Audio Tests from R&D to the Production Line
audioXpress

Transitioning Audio Tests from R&D to the Production Line

Production line audio testing poses many challenges such as noisy environments, harsh operating conditions, high throughput, relative limits, and more. In this article, Steve Temme shares his observations and outlines the main considerations to ensure a successful operation.

time-read
10+ mins  |
March 2023